7-AXIS CNC SWISS MACHINE WITHOUT GUIDE BUSHING

• 36 mm 1-3/8” Bar Capacity
• Dual “C” Axis and “Y” Axis with 19” Travel
• 27-Tools with 11-Driven Tools
• Simultaneous Main & Sub-Spindle CNC Swiss Machining
• Parts Catcher and Chip Conveyor Included
• 1,181 Inch per Minute Rapid Rates

SPECIFICATIONS

MAIN SPINDLE

Maximum RPM / Spindle Bearing: 6,000 RPM / 5 Bearing Spindle, 3 Front, 2 Rear ø110 mm

Spindle Motor: 10Hp 3,000 RPM spindle Motor, 2:1 Pulley Ratio

Collet Nose: Brown & Sharpe #22 or Traub A-32

Drawtube Bore: 1.456” (37 mm)

Maximum Barstock Diameter: 1.25” (32 mm) Standard 1.375” (36 mm) with Adapter

X-Axis Travel: 7.28” (185 mm)

Y-Axis Travel (true Y-Axis, not compound Y): 19.29” (490 mm)

Z-Axis Travel: 6.50” (165 mm)

Rapid Travel Speed X, Y, Z: 1,181 IPM (30 m / min)

Minimum Input Unit: 40 millionths (0.00004”) (0.001 mm)

OD Turning Tool Positions: 6 OD Tools (1/2” or 12 mm) (5-5/8” Tool Plate Available)

ID Turning Tool Positions: 5 ID Tools

OD Turning Tool Size: 1/2” or 12mm (5/8” or 16 mm Optional)

ID Turning Tool Bore Size: 25 mm

Spindle Center Height: 40” (1,015 mm)

SUB-SPINDLE

Sub Spindle RPM/Spindle Bearing: 6,000 RPM / 4-Bearing / Quad-Duplex Pair Configuration

Sub Spindle Motor: 5-HP 3,000 rpm Spindle motor, 2:1 pulley ratio

Collet Nose: Brown & Sharpe #22 or Traub A-32

Maximum Barstock Diameter: 1.250” in Collet Chuck (1.080” (27.5mm) Pass Thru)

X-Axis Travel: 11.53” (293mm)

Z-Axis Travel: 11.61” (295mm)

Minimum Input Unit: 0.0001” (0.001mm = 40 millionths inch)

ID Turning Tool Bore Size: 25mm

Air Blast Nozzle: Included

Finished Parts Ejector: Included, Along with Parts Catcher & Parts Conveyor Belt

LIVE TOOLING

Cross Slide Live Tools: 4-ER-20 Cross Slide Live Tools, 4,000 RPM, 2.0 HP (1.5 kw)

Front Slide Live Tools: 3-ER-20 Front Slide Live Tools, 4,000 rpm, 1.0 HP (0.75 kw)

Live Tool Collet Size: ER-20 Collet, Ø1/2” (0.5 – 13 mm) Tool Shank Capacity 

Max RPM for Live Tools: 4,000 RPM  (1 cross live tool can be substituted on subspindle tool block)

MACHINE DIMENSIONS

Machine Length: 101” (2420mm) ( *+ 36” for Chip Conveyor)

Machine Depth: 68” (1500mm)

Machine Height: 80” (1985mm)

Machine Weight: 8,000lbs (3,628kgs)

Coolant Pump: Dual 50psi 3/4-HP Coolant Pumps for Main and Subspindle

Coolant Tank Capacity: 63-gallon Coolant Tank, with Coolant Flow Confirmation Sensor

Lubrication Distribution: Way Lube Distributed at 3-6 cc / 15-minute Cycle  

Machine Power Requirements: 220vac ±5%, 63-amps, 3-phase, 60Hz

Air Requirements: 85-PSI at 10-CFM for Parts Catcher, Parts Ejector, & Air Blast